Auto level Machine is scientific equipment used in construction and Interior work for accuracy and quality of work.
1. Laser level is used for constructing building and has automatic capability to measure screening distance.
2. Laser line projected on the exact job location which is more convenient for the construction and a time saving, Construction at the same time to guarantee the highest precision.B. Uses
1. In various construction fields, laser level can be used widely. It can also be used in such as: carpentry cementry, painting and even major cutting of sheet metal.
1. 3 degree automatic correction.
2. Automatic notification when calibration out of range.
3. It recognizes quick correctively because of magnetic correction system.
4. From the machine 3 types of ray’s horizontal, vertical and cross randomly make compatible and vertical lines may be extended to the ceiling.
5. Fixing of machine to the bottom point of the location is possible.
6. 360 degree rotating base is equipped with additional fine adjustment.
7. By using receiver, the range of machine is possible up to 30 meter.
8. Use of a tripod machine can be operate to the height of the work level.
2. Vertical line
4. On / Off Switch
5. Horizontal line
7. Micro adjustment knob
8. Adjustment horizontal knob
9. 4 V1H Switch
|Vertical Resolution||5m ± 1mm|
|Horizontal Resolution||5m ± 1mm|
|Automatic Calibration Range||3 degree|
|Horizontal Angle||140 degree|
|Vertical Angle||150 degree|
|Vertical Point Precision||3m ±1mm|
|Line Width||5m ± 1mm|
|Power||1.5 / 2mm|
|Continuous Operating Time||About 13 hr (using all laser line)|
|Weight||The amount of self weight of about 1 kg. (including batteries)|
1. It is horizontally projected on the wall.
2. Vertical line projected on the wall, but the ceiling is in the cross appears in the cross line.
3. The center of the bottom points is the location of the device.
4. Lasers have received features; the distance can be used outdoors.
1. Use high performance alkaline battery (3 batteries).Be careful with the polarity.
2. The leveling of the instrument at the 3 legs of the instrument on the bottom, adjust the screw on top with the main unit to the bubble tube using the wire unit. The unit has auto-calibration feature which automatically adjust it precisely.
3. ON / OFF key which is on the right side turned on, at the same time lightens the bubble tube on the bottom point.
4. How to operate:
5. Depending on the situation, by using the upper main unit(V:vertical, H: horizontal), a fire light combination can be selected. After that, the main unit or manually rotating the fine adjustment screw on the vertical line through the precise control and aiming at targets, using a tripod working height of the unit can be adjusted freely.
1. Pull out an Auto Laser Level from Aluminum Box.
2. Check the battery position.
3. Switch On (Magnetic system start to operate)
4. Now Machine is ready for use.II. Horizontal Line
1. Switch On (Push a horizontal switch button only once).
2. Check a Laser line apart from wall between 1m ~ 10m distance
3. Mark a point at end of left and right side upon Laser line
4. This Laser level machine rotate 360 ̊and you can mark the same manner of No. II – 3.
5. If you want to check the same area, you should not move machine standIII. Vertical Line
1. Push first time at a Vertical switch then this machine show 1line, second time push 2 lines, third time push 4lines (Also this machine supports energy save mode)
2. Check a Laser line apart from wall between 0.2 ~ 5m distance
3. You can see lines that are ceiling and bottom point. You might mark at these points.
4. If you want to check the same area, you should not move machine stand
1. year warranty(Except Customer Fault & Natural Calamities).
2. All products will repair in India.